Top #10 Plastic Weld Glue Reviews With Scores

Last Update:

Our team studied on 45004 reviews available online for Plastic Weld Glue, chose the finest ones and prepared Plastic Weld Glue Reviews for you. It was very difficult to shortlist the ideal Plastic Weld Glue from thousands of products online. However, We tried to make sure that you get only the Plastic Weld Glue from our suggestions. Check our listings-:

Plastic Weld Glue
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.

Comparison Chart for Plastic Weld Glue

45004 reviews were considered when writing our recommendations for the Plastic Weld Glue in this article.

NoProductScoreAction
1J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Dries Black - 0.25 Milliliter (2 Pack)9.8Shop On Amazon
2J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml9.4Shop On Amazon
3J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Translucent Yellow - 25 ml9.4Shop On Amazon
43M Scotch-Weld Plastic & Rubber Instant Adhesive PR409.4Shop On Amazon
5Permatex 84115 5-minute Plastic Weld Adhesive9.4Shop On Amazon
6J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Tan - 25 ml9Shop On Amazon
7J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz8.8Shop On Amazon
8Plastruct Plastic Weld w/applicator 2oz Bottle8.8Shop On Amazon
93M Scotch-Weld Plastic & Rubber Instant Adhesive PR15008.4Shop On Amazon
10Strongest Glue by HG POWER GLUE Industrial cyanoacrylate ca Adhesive Heavy Duty Glue for Plastic Repair Car Boat Model Airplane DIY Plastics PVC Rubber Ceramic Woodworking Steel Metal Pottery8.4Shop On Amazon

Table Of Content:

1. J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe – Dries Black – 0.25 Milliliter (2 Pack)

  • 2 pack – 85 oz.
  • UV Resistant: Yes
  • Dries Clear: No
  • Curing Time: 30 min
  • No waste, no mess cap Works on thermoset and carbon fiber composites, thermoplastics, coated metals, concrete and more.

2. J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe – Black – 25 ml

  • J-B WELD PLASTICBONDER (Black): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure J-B Weld PlasticBonder set and cure color is black.
  • STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI
  • SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

3. J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe – Translucent Yellow – 25 ml

  • J-B WELD PLASTICWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on various plastic surfaces (Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl).
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticWeld takes 5 minutes to set and 1 hour to cure.
  • STRENGTH: J-B Weld PlasticWeld has tensile strength of 3900 PSI.
  • SURFACE APPLICATIONS: Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.

4. 3M Scotch-Weld Plastic & Rubber Instant Adhesive PR40

  • Bonds to a number of substrates, including plastics and rubbers
  • Precise application: pinch container for a precise drop or squeeze for a steady bead
  • Low viscosity adhesive is easily applied from the bottle
  • Strong, durable and long lasting bond on a variety of substrates
  • Fast curing to keep projects moving quickly

5. Permatex 84115 5-minute Plastic Weld Adhesive

  • Structural adhesive designed for general purpose bonding of a wide variety of materials
  • Forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination
  • Requires no primers, sets in five minutes at room temperature
  • Permanent strength up to 3500 PSI
  • Suggested Applications: Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood.

6. J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe – Tan – 25 ml

  • J-B WELD PLASTICBONDER (Tan): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure.
  • STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI.
  • SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.

7. J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty – 2 oz

  • J-B WELD PLASTICWELD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild various plastic compounds and surfaces.
  • CURE AND SET TIME: After kneading the two part formula together by hand, PlasticWeld takes 25 minutes to set and cures in 3 hours.
  • PRODUCT FEATURES AND STRENGTH: J-B Weld PlasticWeld has lap shear strength of 600 PSI.
  • APPLICATIONS: ABS, PVC & CPVC pipes and plastics, auto bumpers and trim, vinyl surfaces and siding, marine repairs & fiberglass parts, plastic water tanks, and plumbing.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
  • Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC
  • Bonds instantly
  • Superior strength
  • Will not shrink or pull away
  • Rebuild automotive trim, fiberglass parts and vinyl siding

8. Plastruct Plastic Weld w/applicator 2oz Bottle

  • 2 Oz.
  • PLASTIC WELD SOLVENT CEMENT
  • Immediately tacky
  • Sets in minutes
  • Permanently bonds ABS to Butyrate, ABS to Styrene, ABS to Acrylic and more

9. 3M Scotch-Weld Plastic & Rubber Instant Adhesive PR1500

  • Bonds to a number of substrates, including plastics and rubbers
  • Precise application: pinch container for a precise drop or squeeze for a steady bead
  • Medium viscosity adhesive is easily applied from the bottle
  • Strong, durable and long lasting bond on a variety of substrates
  • Fast curing to keep projects moving quickly

10. Strongest Glue by HG POWER GLUE Industrial cyanoacrylate ca Adhesive Heavy Duty Glue for Plastic Repair Car Boat Model Airplane DIY Plastics PVC Rubber Ceramic Woodworking Steel Metal Pottery

  • CONVENIENT STORAGE – 1 adhesive system, 4 application options: can be stored in refrigerator/freezer for 1-2 years or longer; use for bonding, strengthening, modelling, filling.
  • HG POWER GLUE BONDS NEARLY MATERIALS – plastic, wood, rubber, glass, metal, aluminum, ceramics, stone etc.
  • IDEAL GLUE FOR A HOST OF APPLICATIONS – a crack in the bumper or motorcycle fairing, a broken headlight bracket, torn RV paneling or simply an instant fix for your child’s favorite toy.
  • SAVE TIME AND MONEY – Nearly all household items can be salvaged quickly at an affordable price.
  • SUPERIOR BOND STRENGTH – Welding Glue from the bottle is unparalleled in its performance and, due to its unique combination of powder and glue, achieves significantly better bonds than standard glues.

Plastic Weld Glue Buying Guide

It happens to us all. You're shopping online for a new Plastic Weld Glue, and suddenly you find yourself comparing not just one product, but several! The problem is that there are too many options! While the process of buying something can be overwhelming (especially when it's something you really want), there are some strategies that will help you make the best decision possible.

The first thing you need to do is narrow down your choices. Decide what it is that you want. Is it a certain color? A specific brand? Do you want the most bang for your buck, or are you willing to pay more for a better product? Once you've decided what it is that you want, start searching for the best deal.

You should be able to find a lot of information about Plastic Weld Glue online. If you're looking at cameras, read reviews from other customers . If you're looking at TVs, check out some reviews on sites like CNET.

Do your research before you buy. Once you've narrowed down your choices, read reviews and compare prices. Make sure that the product is worth what you're paying for it.

Don't Buy It If You Don't Need It. If you're buying a product that you don't need, you're wasting your money.

You don't need to buy a designer purse if you're only going to use it once. If you really want something, save up for it. You'll appreciate it more.

Buy It For The Right Reason. Don't buy something just because it's on sale or because you think you deserve it. If you're going to spend money, make sure that it's for a good reason.

If You Can't Afford It, Don't Buy It. This is a pretty simple rule. If you can't afford it, don't buy it.

Don't Buy Things You Can Get For Free. You shouldn't pay for something that you can get for free. For example, if you're going to a party, don't buy a gift for the host.

Don't Buy Things You Can Get For Free . You shouldn't pay for something that you can get for free. For example,

Conclusion:

We believe that shopping online should be a fun and easy experience. We've helped millions of customers find exactly what they're looking for by using our unique algorithm to recommend products based on your likes and dislikes. In this article, you'll learn about our patented technology and how it can help make choosing the best Plastic Weld Glue as simple as possible.

Dave Muiler

Dave is a young writer with a degree in journalism. He’s well-versed in topics such as literature, video games, and gaming devices. In his free time, he enjoys editing, playing games, exercising and photography.